Green FabLab Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Digital manufacturing at the Green FabLab ====== 

The term "digital manufacturing" summarizes a number of different manufacturing
processes, whose formative commonality lies in the underlying computer-aided production
processes. With this in mind, the Green FabLab at Rhine-Waal University of Applied Sciences,
with its mechanical equipment, aims to offer a view through the keyhole into an Industry 4.0
manufacturing facility. There, too, the areas of CAD design, computer-controlled mechanical
(CNC) manufacturing, robotics, measurement and control technology on distributed systems
(= several communicating, location-independent computers without shared memory) are
brought together for industrial production. For a FabLab (from Fabrication Laboratory), this
means a standard machine park with which the Green FabLab could also be equipped,
supported by funds from the European Regional Development Fund (ERDF). The figure
shows an overview of the provisional machine installation plan.

|{{:experiments:digital_fabrication:laser_cutting_machine_creative_commons_attribution-share_alike_4.0_international_800.jpg?direct&0x600|Figure 1}}|{{:experiments:digital_fabrication:lost_wax-model_of_apple_in_plaster_creative_commons_attribution-share_alike_2.5_generic_800.jpg?direct&0x600|Figure 2}}|{{:experiments:digital_fabrication:photo_by_pelayo_arbues_on_unsplash_800.jpg?direct&0x600|Figure 3}}|

|{{:experiments:digital_fabrication:photo_by_beuwy.com_alexander_putter_on_unsplash.jpg_800.jpg?direct&0x600|Figure 4}}|{{:experiments:digital_fabrication:photo_by_zmorph_multitool_3d_printer_on_unsplash_800.jpg?direct&0x600|Figure 5}}|
Green FabLab Wiki

User Tools

Site Tools

Page Tools
